DIY: Rhinestone and Leather Bracelets


- Leather Trim
- Rhinestones (colored and clear)
- Closures (claws and clasps)
- Rings
- Plier
- E6000 Adhesive

First, take the trim and place it around your wrist for size. Then cut to desired length. Start glueing on the stones
with a q-tip. (Tip: place to heavy objects on left and right of the trim to keep it flat and taught.)

Once dry, take your claw closure and place it at the end of the trim. Squeeze both ends with a plier and
make sure it's tight and snug. Do the same to the other side.

Now, connect the claw closure to a ring.  Do the same to the other side while also connecting
the ring to a clasp closure.

Do the same for the other bracelets and you're done!

Yellow Florals + Denim

Forever 21 Jacket (old)   H&M Tank (old)  Joe's Skirt  |  
Flats (click here for tutorial)  |  H&M Rings and Sunglasses  | 
Pendant Bracelet (click here for tutorial)  |  Forever 21 Bag  | 
Prima Donna Bracelets 

DIY: Gold Chain Trimmed Flats


- Flats (H&M)
- Gold Chain
- E6000 Craft Adhesive

Start by sizing the gold chain for the front and back of your shoe.

Next, take pliers and loosen a link to separate the chain to your desired length. 

Apply adhesive with a q-tip.

Quickly, lay your chain on the glued area and let dry.

Do the same to the back and you're done!


These gold filigree earrings are easy on the ears (very lightweight) and perfect with any outfit!


- Two small and two large gold filigree circles
- Four small and two medium links
- Two earring closures
- Plier

Start by connecting the small and large filigree circles with the medium link. Close with pliers. 

Next, connect the two small links. Attach one link to the small filigree circle (facing the front) and one to the earring closure (facing the side).
Close with pliers.



Free People Jacket   Romeo & Juliet Skirt  /  Breckelles Flats  /  T.J. Maxx Bag  /  H&M Ring  /  DIY Bracelet (click here for tutorial)

DIY: Lucite Clutch

A lucite clutch is perfect for evenings plus the gold foil adds a classic, old glamour touch!


- X-ACTO Paper Trimmer (an X-ACTO knife and mat will work too)
- Gold Foil (I found these in a trimming store)
- Acrylic Box (I got mine here)
- Gold Fastener/Clasp (can be found in a button store)
- Leather Ribbon
- E600 Craft Adhesive

Start by measuring your gold small strips needed for the edges of the front and back of the box. Next, measure the larger strips needed for the left and right sides of the box. Follow the ruler on the trimming board and cut the strips to size. 

Next, apply the glue with a q-tip to the edges.

Apply the gold strips to the glued area and smooth over with leveled surface to smooth out any bubbles.

Do the same for the left and right side of the box. 

Now, glue on the clasp and let it dry completely before you move on to the next step. Tip: to make sure the clasp is centered take piece of paper and mark the space with a pen from the middle to the end of the box with the edge of the paper against the left side of the clasp. Do the same for the right side to make sure they are both evenly spaced.  

Next, punch a hole in the ribbon or clip a hole with a scissor. Glue on the ribbon to the edge of the lid and let dry completely (make sure it doesn't sit past the gold foil so it remains hidden).

Once completely dry, close the lid by fastening the ribbon to the clasp and snap it closed. Done!

Back to Classics: Black & Denim

Asos Top (old)   Junees Skirt  /  Victoria's Secret Pumps  /  Target Sunnies  /  H&M Bag and Keychain  /  DIY Double Pearl Cuff (click here to view)  /  Aldo Earrings

Related Posts Plugin for WordPress, Blogger...