DIY: CHUNKY RHINESTONE STATEMENT NECKLACE


Lately, it's been hard to find a chunky rhinestone necklace perfect for printed and striped tops. So, 
I decided it's time for another DIY! I wanted to find the easiest way instead of buying rhinestones
and glueing them on piece by piece. I found these rhinestone brooches in my local
 jewelry store and decided I can pin them on plastic as a backdrop instead!
Find out how to make your own, below.

Supplies:

- Silver chain
- Rhinestone Brooches
- Plastic sheet (You can get these from your local hardware store.
This one is from Ace Hardware)
- Two silver links and one clasp
- Plier and wire cutter
- E6000 Adhesive
- Pen
- Scissor


Start by outlining around a necklace you currently own as a guide with a pen. 


Now, take another sheet of plastic and place it on top and cut using the outline as a guide.


Two brooches I chose for the design had an attached drop rhinestone. I took my wire cutter and
removed it so I may use it separately in my design. Now, place the brooches and take a pen and 
mark the back as a guide to where the pins should be placed. 


After, I pinned in the brooches and glued down any edges that fell slightly forward when 
placed on. Then I glued on the two drop rhinestones that I cut off from the brooches.


Now, cut a slit close to each end of the plastic sheet and insert the chain halfway so it's doubled.


Then, take two separate chains and open the ends with pliers and connect them to the
double chain attached to the plastic. Tighten the links and connect two small links to 
each side. Lastly, attach a closure to one side and you're done!


2 comments

  1. Wow! That's creative! And beautiful! I love the spirit of it: When I cannot buy what I want, I make it myself! That's fashion!!
    xx, Marky
    www.mypinkboudoir.eu

    ReplyDelete
  2. Thanks Marky! That's what makes it so much fun, creating your own custom pieces ;)

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...